Mainly used for materials that are corrosive and cannot come into contact with metals, such as fluorescent powder, aluminum trichloride, new materials, chemical, food, pharmaceutical, etc

characteristic

1. Continuous production, automatic grading and screening. 2. Enclosed structure with no dust spillage.

3. Low noise. 4Small size, easy installation, convenient operation and maintenance.

5. Start quickly and stop smoothly. 6. The screen mesh has a high utilization rate and is not easy to see. Replace it with a new one.

Structure and properties

Working principle

The vibrating screen is excited by the operation of an electric motor, and the vibrating part is connected by a spring to form a complex spiral vibration. The vibration trajectory is a complex spatial three-dimensional curve, which is a circle when projected horizontally and an ellipse when projected on two vertical planes (i.e. vertical, horizontal, and inclined three-dimensional motion). Adjusting the phase angle of the vibrator's up and down rotating weight blocks can change the motion trajectory of the screen material. When the upper and lower weight blocks overlap and the phase angle is at 0 degrees, the material will radiate outward from the center; When the phase angle of the heavy hammer block is 90 degrees, the material converges towards the center.

Main Technical Data

Graded screening simulation diagram

Wide filtering range
The ZS series vibrating screening machine can screen any particle, fine powder, slurry, or mucus within a certain range. The finest sieving powder can reach 500 mesh or 0.028mm, while the smallest filtering liquid can reach 5 microns. Classification screening, selection, can screen one to five layers of mesh, and can simultaneously perform sorting or filtration of two to six levels. The position of the discharge port can be changed freely along the circumference by 360 degrees

Fully enclosed structure, powder does not fly, liquid does not leak, mesh holes do not block, screened materials are automatically discharged, gate type structure allows materials to be fully screened on the screen surface, high accuracy, large processing capacity, equipment can be installed at any desired position, no need for fixation, easy to move.

Features and advantages

firm-Liquid filtration can quickly remove insoluble substances from various slurries. The separated structure of the screen frame makes it easy and convenient to replace the screen, and increases the service life of the screen. The grid structure has no dead corners and is easy to clean or disinfect. Two materials, stainless steel or carbon steel, can be selected for different usage requirements. Pressure type grid design,3-5The replacement of the screen mesh can be completed in minutes. Use for screen replacement2People are sufficient.

　

Mounting Dimension