VIP member
ZW-ST intelligent moisture analyzer
Brief introduction: The touch screen intelligent rapid moisture analyzer produced by Shanghai Zanwei Weighing Instrument Co., Ltd. adopts the principl
Product details
Produced by Shanghai Zanwei Weighing Instrument Co., LtdUsing the principle of halogen lamp pyrolysis weight, it is a fast methodThe moisture analyzer measures the weight of the sample while the halogen lamp heating unit and moisture evaporation channel quickly dry the sample. During the drying process,Continuous measurement and real-time display of the lost moisture content% of the sample. After the drying process is completed, the final measured moisture content value is locked and displayed. Compared with the international oven heating method, halogen heating can reach the maximum heating power in the shortest time, and the sample can be quickly dried at high temperatures. Its detection results have good consistency with the national standard oven method, are replaceable, and the detection efficiency is much higher than that of the oven method. Generally, the sample can be measured in just a few minutes. And the operation is simple, the testing is accurate, and it can display data such as moisture value, drying value, measurement time, temperature value, etc. And it has the function of connecting with computers and printers.
ZW-ST series touch screen intelligent moisture meter features:
★ Fully automatic heating cabin door dual drive ultra quiet opening and closing, preventing the impact of manual lifting of the lid on the weight, while meeting the requirements for automated detection
★ 7-inch high-definition intelligent touch display screen, real-time dynamic analysis of curves, direct display of moisture percentage/dry weight percentage/dry weight
★ Maximum heating temperature of 230 ℃, meeting the testing requirements of the vast majority of samples
★ The sample is effectively placed in the heating chamber at a height of 35cm
★ Sample testing visual window, real-time monitoring of sample testing changes
★ 20 sets of effective storage addresses to meet the testing requirements for different samples
★ 20 sets of recent test records, available for retrieval and printing of test results at any time
★ The ST series is equipped with two weighing ranges of 100g and 200g, which can meet the maximum weighing capacity of 200g
★ Imported HBM weighing sensor
★ Four layer stainless steel heated inner chamber to improve sample testing efficiency
★ Various high-temperature resistant special materials
★ Multiple patents for appearance, product structure, and functionality
★ Open sample tray, capable of quickly cleaning residual measurement materials
★ Detachable test cover for easy replacement of accessories
★ Category 6 ultra shielded network cable connects the host and instrument
★ Intelligent anti pinch and automatic detection activation function, effectively protecting users and instrument mechanical systems
★ After the test is completed, the cabin door will automatically open, and if left unattended for a long time, the cabin door will automatically close
★ Intelligent dual fan cooling system, cooling heating source and weighing system
★ Fast system updates and upgrades
Technical parameters:
|
ZW-ST Series |
|||||
|
Product model |
ZW-ST100 |
ZW-ST100P |
ZW-ST200 |
ZW-ST200P |
|
|
Maximum weighing |
110g |
210g |
|||
|
Reading accuracy |
0.001g |
0.001g |
|||
|
Usage temperature |
5℃-35℃ |
||||
|
Scale pan size |
Ø100mm |
||||
|
Heating method |
Halogen Lamp |
||||
|
Temperature sensor |
PT 100 |
||||
|
temperature range |
40℃-230℃ |
||||
|
Temperature interval |
1℃ |
||||
|
Moisture range |
0.00%-100.00% |
||||
|
Moisture readability accuracy |
0.01% |
||||
|
Dry residual range |
100.00%-0.00% |
||||
|
Dry residue can be |
0.01% |
||||
|
ATRO |
100%-999% |
||||
|
ATRO |
0%-999% |
||||
|
Temperature setting |
40℃-230℃ By 1℃ Step |
||||
|
Time setting |
1-99min by 10 s |
||||
|
Storage address |
20 |
||||
|
Historical records |
20 |
||||
|
Heating section |
220V ±15% 50HZ/
110V±15% 60HZ
400W |
||||
|
Balance section |
Input: 220V 50HZ/110V 60HZ
Output:9V |
||||
|
Mechanical part |
Input: 220V 50HZ/110V 60HZ
Output:24V
Dual drive |
||||
|
Host size |
215 x 195 x 415mm |
||||
|
Instrument size |
200 x 75 x 135mm |
||||
|
Operating height |
275mm |
||||
|
Heating chamber height |
35mm |
||||
|
Display mode |
7-inch high-definition touch display/7-inch touch panel |
||||
|
Output port |
RS232/RJ45/USB |
||||
|
Communication method |
Ethernet cable |
Wireless Wireless |
Ethernet cable |
Wireless Wireless |
|
|
Battery |
No No |
10,000mAh |
No No |
10,000mAh |
|
|
Calibration method |
Weight calibration External Calibration |
||||
|
Function Expansion |
Customizable Customization |
||||
Precautions for using halogen moisture analyzer:
1. The halogen moisture analyzer is used to measure the moisture content in samples, and any other use may cause harm to individuals and damage to the instrument.
2. Please read the instructions carefully before use and do not use in environments that do not meet the requirements.
3. The halogen rapid moisture analyzer is only for use by professionals who are familiar with the properties of the sample and have received training.
4. The power supply of the halogen rapid moisture analyzer is a three pin grounded socket. It is prohibited to disconnect the instrument's grounding wire or use a power supply that is not well grounded.
5. Adequate space should be ensured around the instrument to prevent heat accumulation and overheating.
6. Do not place flammable materials around the instrument as the area around the heating unit may become hot.
7. After the test is completed, due to the fact that the sample itself, heating unit, and its container will still be very hot, caution should be taken when removing the sample.
8. During the heating and drying process, the temperature of the ring-shaped heating components will reach 400 ℃. Therefore, do not open or touch the heating unit. If you need to turn it on, please disconnect the power and
Wait until it completely cools down.
9. Be particularly careful with flammable or combustible materials, solvent containing substrates, and substrates that produce flammable or explosive gases when heated, as these samples may
Causing harm to the human body or damaging equipment. Therefore, when measuring this type of sample, the operating heating temperature should be low enough to prevent the formation of flames or explosives, and it should be worn properly
Protective gear such as goggles. If the combustibility of the sample is not well understood, the amount of test sample should be minimized as much as possible. In this case, the instrument should be supervised by a dedicated person,
Just in case, please conduct your own risk analysis before the experiment.
10. For matrices containing toxic elements, they can only be heated and dried under well ventilated conditions.
11. A substrate that generates corrosive steam during heating and drying, and when measuring samples of this substrate, the steam condenses on the colder outer shell, causing corrosion,
Suggest reducing the weight of the sample.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-