thermostatic bath characteristic Accurate microprocessor control Three custom temperature preset buttons Redundant overheat protection Front panel locking Electronic calibration

The latest generation PolyScience sink provides excellent temperature control, control, and uniformity. The liquid can be controlled at a temperature of up to 100 ° C (60 ° C without cover) with an accuracy of 0.1 ° C and a uniformity of ± 0.2 ° C. The temperature of the sink is continuously displayed on a bright and easy to read LED panel, with units available in either ° C or ° F. Simply press the button to restore the set temperature. Three custom temperature preset buttons allow for quick selection of commonly used temperature settings.
Dual thermostats provide optimal protection for your machinery and sink. If the temperature of the sink exceeds the pre-set limit, a high limit alarm will be issued. The overheat safety protector that can be set is installed next to the heating. If the temperature of the sink is too high or the liquid level drops too low, the heater will automatically disconnect.
The operation of PolyScience sink is very simple. When loading or removing samples, the steep herringbone polycarbonate cover adapts to glassware of various heights and slopes, allowing the condensate to flow cleanly back into the sink.

Vibration bath characteristic Can be used as a vibrating water bath, Only used as a vibrator or as a water bath Smooth track or reciprocating Vibration effect Accurate microprocessor control Three custom temperature preset buttons Redundant overheat protection Front panel locking Electronic calibration

The PolyScience vibrating water tank system provides superior performance durability, easy-to-use PolyScience water tanks, and precise sample mixing. The entire system consists of a PolyScience 20L or 28L water tank, a vibration platform, and a specially designed polycarbonate see through cover. If you already have a PolyScience 20L or 28L sink, you can easily upgrade it by purchasing a vibrator platform. For applications that require temperatures above 60 º C, you also need to purchase a specially designed vibrator cover (order number 510-117).
This unique, dual acting vibrator can be used for both linear and cyclic motion. Changing the vibration effect is as simple as moving a knob, even when the vibrator is in a jog state! With additional operational flexibility, the range of motion and vibration speeds can be adjusted by the user -2 to 12 mm and 30 to 180 revolutions per minute, respectively. The vibrator speed is continuously displayed on a bright and easy to read LED panel.
The design of the special cover allows for sufficient movement of the vibrator sample plate arm while minimizing heat loss and evaporation. Combined with its steep herringbone design, the flask reaches 1000 ml. To improve the system, a flask holder that can hold 25, 50, 125, 250, 500, or 1000 ml flasks can be used as an accessory.

Note: This product is mainly used as an animal experimental instrument for basic medical research. Non clinical medical equipment.