Product Description:
The needle roller bearings used to support the two output shafts of the transmission case have one pair at each end of each shaft, which increases the radial support force by 30%;
One of the two output shafts of the gearbox is directly reduced and output, while the other has an intermediate transition shaft, which is transmitted through a pair of gears. The width of these gears is 30% wider than other companies, and the safety factor is increased by 30% when transmitting the same torque;
The support structure of the intermediate transition shaft: all bearings used are imported from Japan;
Transmission box with two output shaft structures: adopting a structure to prevent axial displacement, each shaft is equipped with a small thrust bearing. Without this structure, the shaft is prone to displacement during high-speed idle operation;
The transmission box is cast with precision casting, and its appearance meets the level of imported machines;
All materials used for the intermediate shaft inside the transmission box are high-strength steel;
The transmission box has good overall rigidity and is not easily deformed;
The safety factor of the transmission box reaches 1.3;
The main gears and gear shafts inside the transmission box are made of high-strength steelAdopting carburizing and surface quenching, with a hardness of HRC58-62;