The sturdy and reliable I-Wave handle can be used for manual measurement by operators even in the harshest environments. All probes with threads of M10, M6, or M3.5 can be easily installed with an adapter. The star lock system further enhances the multifunctionality of the handle, allowing for quick replacement of instrument heads to achieve interchangeability of measuring heads.

The multi wave handle uses Bluetooth technology to manage multi-sensor electronic probes used for simultaneously measuring multiple cross-sections, checking the diameter and other geometric shapes (ellipticity, taper, etc.) of holes at different heights. It can be programmed to use up to 7 sensors or set other important parameters with specific software. Once the configuration parameters are defined, they will be sent to the controller via Bluetooth and then saved in memory.

All controllers can transmit measurement data to a Marpos electronic device via Bluetooth, such as Nemo, Merlin, Merlin Plus, E9066, or any PC within a 10 meter range.

• No cable can overcome winding and/or fault issues
• Ergonomic Design
• Suitable for use in harsh environments
• Easy interface with all wireless electronic devices
• The sturdy and reliable star lock system can replace the probe within seconds without the need for any zeroing instruments
• Dual charging mode with portable "clip on" charger and battery charger
• The multi wave version allows for the simultaneous collection of multiple parts

• The controller includes a Bluetooth transmitter and a power battery
• The I-Wave controller can be used with standard alkaline "C" type batteries or induction lithium-ion batteries with continuous working time of 220 and 40 hours, respectively
• The I-Wave controller is equipped with a rechargeable lithium-ion battery, which can work continuously for 8 hours and 36 hours respectively
• Fast charging (80%): 2 hours
• Fully charged: 5/6 hours
• Maximum transmission distance: 10 meters
• Protection level: 67 (I-wave), 65 (multi wave)
• Weight: 730g (I-wave); 730g (multiple waves)
• The I-Wave handle ensures excellent repeatability of 1 micron or 0.000040 inches
• For multi wave processing, the repeatability error is considered to be the maximum value between 10% of the tolerance and 1.5 μ m